1.00 $ Milwaukee Chargers And One Battery LaMoure

Related listings

• Riding Lawnmower Troy-bit

  TOOLS - Bathgate (North Dakota) - June 15, 2024 600.00 $

  Riding Lawnmower Troy-bit ⭕ 20hp and 46 inches cut works good Phone number ✆ +1 701-729-1328 Bathgate, North Dakota

• Tools

  TOOLS - North River (North Dakota) - June 13, 2024 50.00 $

  Tools ⭕ 18 volt chordless sawsall and 5 3/8 circular saw...I bought them new..most wear from riding in toolbox...both work great.. no batterys ...my tool color is chevy block orange..if you have batterys you cant go wrong...john 208 87717fivefive Pho...

• Miter Saw And Band Saw

  TOOLS - Argusville (North Dakota) - June 12, 2024 125.00 $

  Miter Saw And Band Saw ⭕ Harbor Freight sliding 10in. miter saw and 12in. band saw. Both have fresh blades and work fine I just dont use them anymore and they need to go. Extra blade goes with the band saw. I would prefer to sell them together. Phone...

• Masterforce Tool Cabinet

  TOOLS - Butte (North Dakota) - June 12, 2024 600.00 $

  Masterforce Tool Cabinet ⭕ Top 36 L x 18 W x 20 1/2 H 8 drawers Bottom 42 L x 18 W x 41 H 11 drawers $600 or best offer Phone number ✆ +1 701-525-1011 Butte, North Dakota

• 9000 Watt Generator

  TOOLS - Harwood (North Dakota) - June 11, 2024 1200.00 $

  9000 Watt Generator ⭕ 9000 watt generator like New only started few times. Needs to go never gets used. Phone number ✆ +1 701-620-4155 Harwood, North Dakota

• Snap On 3/4 Drive 600 Ft Lb Torque Wrench With Case

  TOOLS - Warwick (North Dakota) - June 10, 2024 250.00 $

  Snap On 3/4 Drive 600 Ft Lb Torque Wrench With Case ⭕ Snap On 3/4 Drive 600 ft lb torque wrench with case. Three piece for easy transportation. In Excellent condition. Phone number ✆ +1 701-628-8040 Warwick, North Dakota

• Milwaukee 1/2in Right Angle Electric Drill

  TOOLS - Mantador (North Dakota) - June 10, 2024 150.00 $

  Milwaukee 1/2in Right Angle Electric Drill ⭕ Never used, like new, $150.00 Phone number ✆ +1 701-643-1043 Mantador, North Dakota

• Antique Tools

  TOOLS - Prairie Rose (North Dakota) - June 10, 2024 1.00 $

  Antique Tools ⭕ I have for sale an assortment of antique hand tools from the 20s and 30s. Some may be older, some newer. The tools are reasonably priced. It is located at my booth at Antique Addiction. You can find them at 3529 W. Emory Rd., Powell. ...

• 12' Double-Sided Warner Ladder

  TOOLS - Dodge (North Dakota) - June 10, 2024 80.00 $

  12' Double-Sided Warner Ladder ⭕ Warner 250 lb. rated wooden ladder. 12 tall and double-sided so you can climb up either side. In good condition -- no rot and stored under cover. Phone number ✆ +1 701-906-9344 Dodge, North Dakota

• Husky Tool Box

  TOOLS - Canton City (North Dakota) - June 9, 2024 20.00 $

  Husky Tool Box ⭕ Used Phone number ✆ +1 701-963-3557 Canton City, North Dakota

• Stanely Rolling Tool Box.

  TOOLS - Knox (North Dakota) - June 9, 2024 30.00 $

  Stanely Rolling Tool Box. ⭕ Stanely fold out rolling tool box. Works great. Phone number ✆ +1 701-251-4534 Knox, North Dakota

• Stihl Ms290 Chainsaw With 20 Inch Bar

  TOOLS - Martin (North Dakota) - June 8, 2024 359.00 $

  Stihl Ms290 Chainsaw With 20 Inch Bar ⭕ Stihl ms290 chainsaw with 20 inch bar. Located at 720 Madison in Covington, Ky> Hours are 9:30 to 5: 30 Monday thru Friday. Saturday 10 till 5, closed Sundays. Phone number ✆ +1 701-398-7595 Martin, North Dakot...

• U.S. TOOL/BAIRD 28 MULTI-SLIDE MACHINE MULTISLIDE #28

  TOOLS - LaMoure (North Dakota) - June 8, 2024 15750.00 $

  U.S. TOOL/BAIRD 28 MULTI-SLIDE MACHINE MULTISLIDE #28 ⭕ U.S. TOOL/BAIRD 28 MULTI-SLIDE MACHINE MULTISLIDE #28 - This unit was PULLED FROM A WORKING ENVIRONMENT DUE TO PASSING OF ITS FORMER OWNER. - According to the son of the former owner this machin...

• BAKER Universal Test Set

  TOOLS - Sawyer (North Dakota) - June 8, 2024 75.00 $

  BAKER Universal Test Set ⭕ This is a universal test set by Baker. 75 obo Phone number ✆ +1 701-837-4797 Sawyer, North Dakota

• 2002 Nissan Propane Forklift PJ02A20PV - Only 5036 Hours

  TOOLS - Pettibone (North Dakota) - June 7, 2024 9940.00 $

  2002 Nissan Propane Forklift PJ02A20PV - Only 5036 Hours ⭕ Nissan PJ02A20PV Specifications: •Manufacturer: Nissan •Model: PJ02A20PV •SN: PJ02-9H0520 •Capacity with upright vertical: 4000lbs. / 188 •Approximate truck weight as equipped: 7965 lbs. •Mas...

• Shap Fan/attic Fan

  TOOLS - Flasher (North Dakota) - June 7, 2024 50.00 $

  Shap Fan/attic Fan ⭕ I have a large attic fan that would make a nice shop fan. Works great. All offers will be considered. Phone number ✆ +1 701-578-3233 Flasher, North Dakota

• R.V. Brush

  TOOLS - Dunseith (North Dakota) - June 7, 2024 35.00 $

  R.V. Brush ⭕ A R.V., boat, car, truck, ATV,.... Brush with water nozzles. Phone number ✆ +1 701-277-9300 Dunseith, North Dakota

• Corona 24 Bypass Pruner Loppers

  TOOLS - Drayton (North Dakota) - June 6, 2024 20.00 $

  Corona 24 Bypass Pruner Loppers ⭕ Corona 24 Bypass Pruner Loppers in excellent condition. The Corona 24 in. Bypass Pruner Loppers with Metal Handle lets you handle pruning chores with less effort. Made from high-carbon steel with tubular handles, thi...

• Hardware Organizers

  TOOLS - Inkster (North Dakota) - June 6, 2024 80.00 $

  Hardware Organizers ⭕ Selling as a lot. Refer to the pictures. I accumulated these over the years from garage sales with a goal to use them for my fasteners. I found a proper bolt chest of drawers that works better, thus I am selling these. Phone num...

• Guitar Body

  TOOLS - Streeter (North Dakota) - June 6, 2024 400.00 $

  Guitar Body ⭕ Solid walnut, hand inlay. Pics speak for themselves. Many, many hours of work. Phone number ✆ +1 701-354-2350 Streeter, North Dakota

• Craftsmen 1/3 Hp Bench Grinder

  TOOLS - Lidgerwood (North Dakota) - June 4, 2024 30.00 $

  Craftsmen 1/3 Hp Bench Grinder ⭕ Sears craftsmen 6 6x3/4 1/3hp bench grinder works and runs fine need.a wheel replacement looking for 35-40 for it call pr txt me for info Phone number ✆ +1 701-357-1337 Lidgerwood, North Dakota

• Husqvarna K 760 Concrete Saw

  TOOLS - Tappen (North Dakota) - June 4, 2024 550.00 $

  Husqvarna K 760 Concrete Saw ⭕ Husqvarna k 760 Concrete/ metal cutting Good condition. Comes with metal abrasive disk, and concrete blade. $550 obo. Call or text No trades Phone number ✆ +1 701-582-9068 Tappen, North Dakota

• HVAC TUBING CUTTER

  TOOLS - Lisbon (North Dakota) - June 4, 2024 15.00 $

  HVAC TUBING CUTTER ⭕ Ritchie tubing cutter in good working condition. Spare wheel in handle. $15 Phone number ✆ +1 701-122-5529 Lisbon, North Dakota

• JUNGERS Heat Stove UNUSED Fuel Coal Oil Kerosene Furnace Grafton WI

  TOOLS - Burlington (North Dakota) - June 4, 2024 600.00 $

  JUNGERS Heat Stove UNUSED Fuel Coal Oil Kerosene Furnace Grafton WI ⭕ Jungers Blufire Heat stove Made by Jungers Stove & Range Company - Grafton Wisconsin Bought new at Lauterborns Appliance Store, never hooked up. Taken care of, these will last you ...

• Snap On Tool Cart

  TOOLS - Berthold (North Dakota) - June 3, 2024 700.00 $

  Snap On Tool Cart ⭕ For sale is a Snap-on tool cart. Part number KRSC33APJH color is candy apple red. It is in very good shape. Comes with drawer liners. No dents, dings, etc. TOOLS ARE NOT INCLUDED. This retails for $1150 new. Phone number ✆ +1 701-...

• NEW-DeWalt DCD950 Hammerdrill Kit

  TOOLS - Robinson (North Dakota) - June 2, 2024 120.00 $

  NEW-DeWalt DCD950 Hammerdrill Kit ⭕ NEW-DeWalt DCD950 Hammerdrill together with (1)New 18volt XRP battery and Model 9116 Multivolt charger. Never used-not a refurbished kit . Includes Hard Case.Call I wont answer emails due to spammers/scammers-cash ...

• Ariat Steel Toe Boots. 10.5 Wide

  TOOLS - Elgin (North Dakota) - June 2, 2024 125.00 $

  Ariat Steel Toe Boots. 10.5 Wide ⭕ For Sale. These boots are brand new in the box. Never worn. Price new is 176 before tax. Best to text 479 285955six. I can meet you in little rock or hot springs. Thanks. Phone number ✆ +1 701-656-8632 Elgin, North ...

• Snap On Tool Box Or Trade For Tractor Or Guns

  TOOLS - Reynolds (North Dakota) - June 2, 2024 5000.00 $

  Snap On Tool Box Or Trade For Tractor Or Guns ⭕ Snap on tool box for sale 5000 OBO. call or text May consider trades.....Thanks for looking. Phone number ✆ +1 701-620-9494 Reynolds, North Dakota

• FLUORESCENT LIGHT BALLASTS

  TOOLS - Towner (North Dakota) - June 1, 2024 1.00 $

  FLUORESCENT LIGHT BALLASTS ⭕ FLOURESCENT LIGHT BALLASTS, ...... FLORESCENT LIGHT BALLASTS Phone number ✆ +1 701-698-9049 Towner, North Dakota

• Snap On MODIS

  TOOLS - Wildrose (North Dakota) - May 31, 2024 1500.00 $

  Snap On MODIS ⭕ This SnapOn MODIS works great. It is a Lab Scope, OBD-2 Scanner, (OBD-1 capable but not includded) Tech Data (Shop Key), Tech Tips, Bi-directional controls, Etc. all included This is a complete unit with a 13.2 update. It has Domestic...

• **NEW** GREENWORKS Electric Snow Shovel

  TOOLS - Perth (North Dakota) - May 30, 2024 69.00 $

  **NEW** GREENWORKS Electric Snow Shovel ⭕ Have you heard the rumor about a lot of snow this winter? Get ready for it with this NEW (still in the package!) Greenworks electric snow shovel. This retails for $99.99 and similar models up to $149.99, but ...

• ***** CARHARTT DUCK COVERALL *****

  TOOLS - Woodworth (North Dakota) - May 30, 2024 95.00 $

  ***** CARHARTT DUCK COVERALL ***** ⭕ FOR SALE ..... NEW /UN-USED PAIR OF CARHARTT DUCK COVERALLS (QUILT LINED). SIZE; 46 X 34 TALL. HEAVY DUTY AND WARM. THESE SELL FOR APPROX. $115.00 to $155.00 ON LINE. IF INTERESTED PLEASE CALL OR E-MAIL. I DO NOT ...

• Razor E200 Electric Scooter, Teal - Brand New

  TOOLS - White Earth (North Dakota) - May 30, 2024 95.00 $

  Razor E200 Electric Scooter, Teal - Brand New ⭕ Razor E200 Electric Scooter, Teal - Brand New - $95 Plus Tax Retail - $170 Subject to 7% sales tax. Call or Text About this item Important Made in USA Origin Disclaimer: For certain items sold by Walmar...

• NEW IN BOX Asco 8262G 2-way Valve 24V DC

  TOOLS - Grand Forks (North Dakota) - May 30, 2024 35.00 $

  NEW IN BOX Asco 8262G 2-way Valve 24V DC ⭕ NEW IN BOX Asco 8262G 2-way Valve 24V DC 2-way valve and consumes 10.6W 1/4 NPTF on both inlet/outlet. Operating pressures are Air 15psi/ Water 16psi/ LT Oil 16psi and uses the rebuild kit no. 316538 I will ...

• Electric Furnace

  TOOLS - Larimore (North Dakota) - May 30, 2024 85.00 $

  Electric Furnace ⭕ Good working electric furnace. Asking $85.00 Call Brian 788 6307 Phone number ✆ +1 701-726-6897 Larimore, North Dakota

• Miller Dialarc 250 Stick Welder AC/DC

  TOOLS - Munich (North Dakota) - May 29, 2024 1195.00 $

  Miller Dialarc 250 Stick Welder AC/DC ⭕ Bought new for a body shop. Either saw really lite use or was extremely well taken care of. No real signs of any heavy use or normal wear and tear to speak off. Works great. Very serious about moving so all off...

• 2 New Diablo Router Bits

  TOOLS - Mohall (North Dakota) - May 28, 2024 20.00 $

  2 New Diablo Router Bits ⭕ Both for $20 call or text they are new never used Phone number ✆ +1 701-356-6789 Mohall, North Dakota

• Commemorative Super Bowl Pin Display Hardees With 22 Pins

  TOOLS - Hannaford (North Dakota) - May 28, 2024 20.00 $

  Commemorative Super Bowl Pin Display Hardees With 22 Pins ⭕ Thanks Phone number ✆ +1 701-323-9723 Hannaford, North Dakota

• Masonry Equipment & Scaffolding

  TOOLS - Osnabrock (North Dakota) - May 28, 2024 1.00 $

  Masonry Equipment & Scaffolding ⭕ We rent and sell our scaffolding inventory. This includes new and used scaffolding and accessories, such as planks, X-braces, pins, screw legs, etc. Our inventory consists of conventional frame scaffolding and Non-St...

• 16 Foot Davidson Ladder

  TOOLS - Upham (North Dakota) - May 28, 2024 60.00 $

  16 Foot Davidson Ladder ⭕ 16 foot Davidson extension ladder, excellent condition, seldom used. $60 OBO text prefered Phone number ✆ +1 701-707-3618 Upham, North Dakota

• Bostitch Cap Stapler Kit

  TOOLS - New Town (North Dakota) - May 27, 2024 160.00 $

  Bostitch Cap Stapler Kit ⭕ Brand New $160 18 Gauge Stapler w/ 1 Caps & Staples Phone number ✆ +1 701-767-2737 New Town, North Dakota

• 36 Wide Spreader Bar Lifting Device.

  TOOLS - Columbus (North Dakota) - May 27, 2024 1.00 $

  36 Wide Spreader Bar Lifting Device. ⭕ $140 Phone number ✆ +1 701-324-4175 Columbus, North Dakota

• Hammer Drill

  TOOLS - Luverne (North Dakota) - May 27, 2024 70.00 $

  Hammer Drill ⭕ Metabo 2 speed hammer drill Phone number ✆ +1 701-312-4560 Luverne, North Dakota

• Milwaukee 18v Battery 5.0

  TOOLS - Gardena (North Dakota) - May 26, 2024 100.00 $

  Milwaukee 18v Battery 5.0 ⭕ Brand new milwaukee m18 xc5.0 battery 120$ willing to sell for 100$ obo you can contact me at cash only Phone number ✆ +1 701-323-8969 Gardena, North Dakota

• Electric Blower

  TOOLS - Bowman (North Dakota) - May 26, 2024 25.00 $

  Electric Blower ⭕ Electric blower model Manley 14 Phone number ✆ +1 701-170-6155 Bowman, North Dakota

• Craftsman 10-inch Radial Saw

  TOOLS - Leal (North Dakota) - May 26, 2024 125.00 $

  Craftsman 10-inch Radial Saw ⭕ The saw has had the new guard kit installed which included new wood table, blade guard assembly and trigger handle assembly. The saw includes a heavy duty base. Original owners manual and guard kit manual also available...

• Wilton Vice

  TOOLS - Stanton (North Dakota) - May 26, 2024 50.00 $

  Wilton Vice ⭕ Wilton bench vice 4 in wide jaws opens about 4 or 5 inches good base swivels side to side at the base good working order Asking 50 dollars Call or text Thanks Phone number ✆ +1 701-509-2459 Stanton, North Dakota

• Electronic Gas Analizer

  TOOLS - Carpio (North Dakota) - May 26, 2024 325.00 $

  Electronic Gas Analizer ⭕ Bacharach electronic gas analizer Never been used $325 obo Phone number ✆ +1 701-824-6251 Carpio, North Dakota

• Compound Saw

  TOOLS - Wahpeton (North Dakota) - May 25, 2024 50.00 $

  Compound Saw ⭕ Works good 10 saw Phone number ✆ +1 701-713-7561 Wahpeton, North Dakota

• Paint Shaker

  TOOLS - Harwood (North Dakota) - May 25, 2024 50.00 $

  Paint Shaker ⭕ Red Devil Commercial paint shaker Phone number ✆ +1 701-519-2162 Harwood, North Dakota

• Snap On Tool Box

  TOOLS - Steele (North Dakota) - May 25, 2024 1600.00 $

  Snap On Tool Box ⭕ Tools not included. Call larry Phone number ✆ +1 701-170-2571 Steele, North Dakota

• Tool Belt Occidential Leather

  TOOLS - Wing (North Dakota) - May 25, 2024 250.00 $

  Tool Belt Occidential Leather ⭕ BRAND NEW MODEL#8580 BROWN-FAT LIP LEATHER TRIMED WITH #5055 STRONG HOLD SUSPENDERS PAID $475.00 CASH ONLY Phone number ✆ +1 701-995-8375 Wing, North Dakota

• Delta Professional 10 Table Saw

  TOOLS - Walcott (North Dakota) - May 24, 2024 425.00 $

  Delta Professional 10 Table Saw ⭕ Im looking to sell my Delta Professional Contractor table saw, I recently combined shops with some friends who have a cabinet saw, so I dont need this saw anymore. I put the unisaw extension table and fence on this s...

• Cornwell Long Wrench Set

  TOOLS - Devils Lake (North Dakota) - May 24, 2024 75.00 $

  Cornwell Long Wrench Set ⭕ Cornwell x-long wrench set of 5 from 1/2 to 3/4 Price is $75.00 Firm please call leave voicemail or text Phone number ✆ +1 701-421-8532 Devils Lake, North Dakota

• Table Saw

  TOOLS - Fredonia (North Dakota) - May 24, 2024 65.00 $

  Table Saw ⭕ rockwell table saw 34-850 9 table saw Phone number ✆ +1 701-734-8086 Fredonia, North Dakota

• AC Vacuum Machine JB Platinum 10cfm For Sale

  TOOLS - Fairmount (North Dakota) - May 24, 2024 600.00 $

  AC Vacuum Machine JB Platinum 10cfm For Sale ⭕ Ac vacuum machine JB platinum 10 cfm for sale. Barely used Phone number ✆ +1 701-645-6758 Fairmount, North Dakota

• Husqvarna Handheld Blower 225HBV- Used

  TOOLS - Beulah (North Dakota) - May 24, 2024 95.00 $

  Husqvarna Handheld Blower 225HBV- Used ⭕ Husqvarna Handheld Blower 225HBV- Used SN# 840338 25cc gas powered 2 stroke Runs Great! Asking: $95 OBO Thanks for looking! Check out my other ads. Phone number ✆ +1 701-148-5702 Beulah, North Dakota

• Vintage GM Sidebar Pick Set

  TOOLS - Minnewaukan (North Dakota) - May 23, 2024 200.00 $

  Vintage GM Sidebar Pick Set ⭕ Vintage GM Sidebar Lock Pick Set.This was made by R&D Tool Company and comes complete in a leather case with 6 tools and instructions.For legal and professional use only.This rare set is impossible to find anymore.$200 c...

• Millermatic 250 Wirefeed Welder

  TOOLS - Parshall (North Dakota) - May 23, 2024 2200.00 $

  Millermatic 250 Wirefeed Welder ⭕ A welding machine on a cart with bottle rack. Not a cheap machine. 15ft gun and a 30ft spool gun. HP gas regulator and hose included. No tank. 240v 40a AC input. If you are looking for a production machine or a good ...

• Craftsman 1/2Hp 6 Bench Grinder

  TOOLS - Spiritwood Lake (North Dakota) - May 23, 2024 150.00 $

  Craftsman 1/2Hp 6 Bench Grinder ⭕ Craftsman bench grinder has few scratches and scuffs but works great. 1/2Hp Also comes with new craftsman wire wheel brush. Phone number ✆ +1 701-706-3380 Spiritwood Lake, North Dakota

• Ladder, Werner 16 Ft Aluminum, 250 Lb Rating

  TOOLS - Leeds (North Dakota) - May 22, 2024 100.00 $

  Ladder, Werner 16 Ft Aluminum, 250 Lb Rating ⭕ Ladder in near new condition, 250 lb rating. Call Phone number ✆ +1 701-321-6808 Leeds, North Dakota

• Cutting Torch-welding Kit With Leather Protective Gear (oxy Acetylene)

  TOOLS - Bowman (North Dakota) - May 22, 2024 350.00 $

  Cutting Torch-welding Kit With Leather Protective Gear (oxy Acetylene) ⭕ Complete oxygen & acetylene cutting torch kit with options for welding. Includes oxy-acetylene tanks on dolly with cutting torch and leather long sleeve shirt, protective mask a...

• Fronius Welder

  TOOLS - Amidon (North Dakota) - May 21, 2024 1.00 $

  Fronius Welder ⭕ Fronius Welder. Model 3200 2 up down guns push pull aluminum gun low hours rollers and parts included. call Phone number ✆ +1 701-633-7079 Amidon, North Dakota

• Toolbox W A Varied Of Tools

  TOOLS - Lidgerwood (North Dakota) - May 21, 2024 3000.00 $

  Toolbox W A Varied Of Tools ⭕ im selling a toolbox with a varied of tools. i have 3 totes full of tools and some are hammers wrenches sockets and rachets impact wrenches crow bars just to name some. if interested plz call greg at Phone number ✆ +1 70...

• Micro-Start XP-10

  TOOLS - Jamestown (North Dakota) - May 20, 2024 130.00 $

  Micro-Start XP-10 ⭕ I have a brand new, never opened Micro-Start XP-10 Will jump start up to a 7.3L 20+ jumps on full charge. 600 peak amps 18000 milli-amps Will also charge your cell phone, tablet, laptop, etc. comes will all the required charging c...

• 800lb Buyers Salt Spreader

  TOOLS - Washburn (North Dakota) - May 20, 2024 450.00 $

  800lb Buyers Salt Spreader ⭕ This Buyers salt spreader holds about 800 pounds of salt and is still in good condition. Im selling it because I have too many and dont want it to sit and go to waste. Phone number ✆ +1 701-393-9742 Washburn, North Dakota

• Johnson Manual Leveling Laser Transit

  TOOLS - Towner (North Dakota) - May 20, 2024 250.00 $

  Johnson Manual Leveling Laser Transit ⭕ Very lightly used Johnson manual leveling laser transit. All original parts are included in box and in very good working condition. Recently tested to make sure. Phone number ✆ +1 701-908-6439 Towner, North Dak...

• Filter 1 Hydrotron Wet Down Draft Table Dust Collector Workstation

  TOOLS - McVille (North Dakota) - May 20, 2024 8999.00 $

  Filter 1 Hydrotron Wet Down Draft Table Dust Collector Workstation ⭕ Used Filter 1 Wet Type Downdraft Table Model DHYD1-50-10-6A The Filter 1 Hydrotron Downdraft Table is a self-contained workstation with its own water dust collection system, excelle...

• SHOP VAC 10 GALLON CONTRACTOR WET VAC

  TOOLS - Fairmount (North Dakota) - May 20, 2024 50.00 $

  SHOP VAC 10 GALLON CONTRACTOR WET VAC ⭕ HEAVY DUTY COMMERCIAL CALL 793-0309 Phone number ✆ +1 701-663-6519 Fairmount, North Dakota

• R12 FREON RECHARGE HOSE KIT

  TOOLS - Binford (North Dakota) - May 20, 2024 8.00 $

  R12 FREON RECHARGE HOSE KIT ⭕ GREAT CONDITION,CAN BRING TO GAINESVILLE ON NEXT TRIP OVER.HAVE OTHER ITEMS FOR SALE.TYPE IN THE SEARCH BOX ON CRAIGSLIST GAINESVILLE SEARCH BOX FIRST PAGE AND HIT ENTER 2 TIME TO SEE ITEMS.PLEASE CALL Phone number ✆ +1 ...

• Miller Spectrum Thunder Plasma Cutter

  TOOLS - Drake (North Dakota) - May 19, 2024 350.00 $

  Miller Spectrum Thunder Plasma Cutter ⭕ This plasma cutter is great for cutting thin metal but is not recommended for anything thicker than 3/16 thick Phone number ✆ +1 701-826-9297 Drake, North Dakota

• Milwaukee M12 Fuel Brushless

  TOOLS - Alexander (North Dakota) - May 19, 2024 125.00 $

  Milwaukee M12 Fuel Brushless ⭕ Brand new Milwaukee Impact driver M12 Fuel brushless with 2 new batteries, charger and hard case. 5 5 nine- 3 0 1- 9 1 7 4 Phone number ✆ +1 701-151-1184 Alexander, North Dakota

• Coats Tire Balancer 1001

  TOOLS - Kenmare (North Dakota) - May 19, 2024 2500.00 $

  Coats Tire Balancer 1001 ⭕ i have a coats tire balancer im upgrading my equipment really good machine does from 13 inch wheels to 22 inch comes with cones and adapters i currently have it at my shop but will be talking it home as soon as the other on...

• Candy Vending Machines, Business Opportunity

  TOOLS - Crystal (North Dakota) - May 19, 2024 20.00 $

  Candy Vending Machines, Business Opportunity ⭕ Candy Vending Machines Quantity: 30-50 Stored In Garage Would like to sell is all together. $20/each or best offer. Phone number ✆ +1 701-625-1907 Crystal, North Dakota

• Machine Base Stand Table

  TOOLS - Sanborn (North Dakota) - May 19, 2024 50.00 $

  Machine Base Stand Table ⭕ This equipment base is supported on four spring vibration isolators made by mason industries. Measures 33x36x24 high. Made of 1X1 1/2 and 1x1 tubing. $50 Pat Phone number ✆ +1 701-717-4404 Sanborn, North Dakota

• Super Secure Heavy Duty WEATHER GUARD 645-3-01 All Purpose Chest

  TOOLS - Kulm (North Dakota) - May 18, 2024 247.00 $

  Super Secure Heavy Duty WEATHER GUARD 645-3-01 All Purpose Chest ⭕ Super Heavy Duty, yet compact and extremely secure! Locks secure as Fort Knox. Have 2 keys. BARELY USED (never been used on outside of truck) Back of the chest can be placed tight aga...

• Load Locks

  TOOLS - Wishek (North Dakota) - May 18, 2024 60.00 $

  Load Locks ⭕ 6 load locks. Must sell to settle estate. Phone number ✆ +1 701-630-8428 Wishek, North Dakota

• Choice Of End Mills - HSS

  TOOLS - St. John (North Dakota) - May 18, 2024 1.00 $

  Choice Of End Mills - HSS ⭕ Choice of End Mills - HSS Phone number ✆ +1 701-172-9418 St. John, North Dakota

• Snap On 3/8 12 Inch Breaker Bar

  TOOLS - Medina (North Dakota) - May 18, 2024 40.00 $

  Snap On 3/8 12 Inch Breaker Bar ⭕ If ads still up I still have text preferred Phone number ✆ +1 701-119-3305 Medina, North Dakota

• David White LD-50N Laser Receiver

  TOOLS - Crystal (North Dakota) - May 18, 2024 350.00 $

  David White LD-50N Laser Receiver ⭕ David White LD-50N Universal Laser Receiver. In great condition, works excellent, just dont use anymore. Price is $350 obo. Phone number ✆ +1 701-829-5278 Crystal, North Dakota

• Edge Bander

  TOOLS - Havana (North Dakota) - May 18, 2024 5800.00 $

  Edge Bander ⭕ Cehise EP-8 edge bander. Text for a video of it working. Cash only will, not ship!! Phone number ✆ +1 701-194-3617 Havana, North Dakota

• Propane Salamander

  TOOLS - Hatton (North Dakota) - May 18, 2024 1.00 $

  Propane Salamander ⭕ nice little heater 75$ Phone number ✆ +1 701-680-1939 Hatton, North Dakota

• 3000 LB. WINCH

  TOOLS - Alamo (North Dakota) - May 17, 2024 80.00 $

  3000 LB. WINCH ⭕ 3000 LB. CHAMPION WINCH, NEW NEVER USED. 80.00. CALL Phone number ✆ +1 701-103-2002 Alamo, North Dakota

• Tool Bag And Tools

  TOOLS - Oberon (North Dakota) - May 17, 2024 1.00 $

  Tool Bag And Tools ⭕ On our online auction @ Grays Towing http://graystowinginc.hibid.com/lot/29677031/tool-bags-and-tools/?ref=catalog Check out our other items as well Phone number ✆ +1 701-534-7342 Oberon, North Dakota

• 1/3hp General Drain Cleaner

  TOOLS - Hazelton (North Dakota) - May 17, 2024 200.00 $

  1/3hp General Drain Cleaner ⭕ I have for sale a 1/3 hp general drain cleaner in good condition and ready for use for more information please contact. Phone number ✆ +1 701-387-4790 Hazelton, North Dakota

• 26 8HP Snapper Briggs Stratton Snowblower Electric Start (Delivery)

  TOOLS - St. Thomas (North Dakota) - May 17, 2024 180.00 $

  26 8HP Snapper Briggs Stratton Snowblower Electric Start (Delivery) ⭕ 26 8HP Snapper Briggs Stratton snowblower. Engine runs good, carburetor has been drained and everything checked over. Electric start works! Has tire chains. $180 firm, can deliver ...

• Ryobi STP Power Drill & Case

  TOOLS - Argusville (North Dakota) - May 17, 2024 25.00 $

  Ryobi STP Power Drill & Case ⭕ Great drill. Includes battery. No charger, but can be bought cheap. Compatible with Ryobi 18v chargers. Feel free to text or reply to email with any questions. Asking $25 Phone number ✆ +1 701-707-3723 Argusville, North...

• Rigid Compressor

  TOOLS - Devils Lake (North Dakota) - May 16, 2024 65.00 $

  Rigid Compressor ⭕ Compressor Phone number ✆ +1 701-932-1452 Devils Lake, North Dakota

• Black & Decker Grasshog

  TOOLS - Hillsboro (North Dakota) - May 16, 2024 10.00 $

  Black & Decker Grasshog ⭕ Black & Decker Electric Line Trimmer, works great, just switched to gas. Phone number ✆ +1 701-292-2128 Hillsboro, North Dakota

• John Deere Dump Wagon

  TOOLS - Esmond (North Dakota) - May 16, 2024 250.00 $

  John Deere Dump Wagon ⭕ 17 cubic feet. Very, very good condition and always kept inside. Phone number ✆ +1 701-788-6089 Esmond, North Dakota

• Truck Tool Box

  TOOLS - Kindred (North Dakota) - May 15, 2024 175.00 $

  Truck Tool Box ⭕ Brand new Tractor Supply Co. Full-Size Low-Profile Extra Deep Single Lid Tool Box lets you keep your tools safe and secure. Fits full-size trucks Extra deep design Brite tread aluminum finish Single Lid Design Stainless steel latches...

• NEW Toro 159cc Replacement Engine

  TOOLS - Inkster (North Dakota) - May 15, 2024 150.00 $

  NEW Toro 159cc Replacement Engine ⭕ Brand new Toro 159cc replacement engine. Never been started, has electric start and recoil start. Still on delivery box. Make your mower like new again. $150 or best offer. Vertical shaft 25mm diameter shaft approx...

• Auger

  TOOLS - Kindred (North Dakota) - May 14, 2024 1.00 $

  Auger ⭕ auger asking 300 Phone number ✆ +1 701-307-9623 Kindred, North Dakota

• Truck Boxes

  TOOLS - Bowman (North Dakota) - May 14, 2024 350.00 $

  Truck Boxes ⭕ 3 stainless steel truck boxes. 1 large behind the cab Kobalt, and 2 side boxes. Very good condition. Phone number ✆ +1 701-417-4430 Bowman, North Dakota

• Air Hose (NEW)

  TOOLS - Harwood (North Dakota) - May 14, 2024 10.00 $

  Air Hose (NEW) ⭕ This Day-Glo orange, kink-resistant design PVC hose is a quality multi-purpose air hose. Its lightweight body and 50 ft. length allow for easy long-distance usage. The durable crafted PVC is grease, oil and abrasion resistant. 3/8 in...

• Tools- Complete Work Shop - Estate Sale

  TOOLS - Goodrich (North Dakota) - May 13, 2024 1.00 $

  Tools- Complete Work Shop - Estate Sale ⭕ Estate sale of complete workshop of tools this sat and Sunday starting at 10: am all must be sold- dealers welcome . Take 299 east just past Churn Creek road follow the sign to El Toro Lane. Bella Vista area....

• ::◈::K2857-1 Lincoln Ranger((2~2~5))Engine Welder Generator::◈::

  TOOLS - Cooperstown (North Dakota) - May 13, 2024 1523.00 $

  ::◈::K2857-1 Lincoln Ranger((2~2~5))Engine Welder Generator::◈:: ⭕ • Smooth DC welding output for a broad range of stick electrodes, such as Lincoln Excalibur® 7018 (AWS E7018) and Fleetweld® 5P+ (AWS E6010). Also capable of MIG, flux-cor...

• Porter Cable 18v Cordless Tool Set

  TOOLS - Berthold (North Dakota) - May 13, 2024 200.00 $

  Porter Cable 18v Cordless Tool Set ⭕ Nice set of porter cable cordless tools for sale that are only two years old. Set includes two drills, an impact, saw zall, circular saw, light, two chargers, three batteries, and a bag. Only reason for selling is...

• Vintage / Antique Billings Wrench Lot

  TOOLS - Sherwood (North Dakota) - May 12, 2024 20.00 $

  Vintage / Antique Billings Wrench Lot ⭕ Selling these professionally restored antique / Vintage Billings tools. Most are from the 1930s-1940s in amazing condition . Professionally restored , rust free , and poly coated for a long lasting protection. ...

• Load Bars

  TOOLS - Hunter (North Dakota) - May 12, 2024 20.00 $

  Load Bars ⭕ Freight load bars! Have 10, all for $150 or $20 each! Phone number ✆ +1 701-186-3029 Hunter, North Dakota

• Two Bostich Framing Guns + Nails

  TOOLS - Loma (North Dakota) - May 12, 2024 300.00 $

  Two Bostich Framing Guns + Nails ⭕ NEW TELEPHONE # -- 2 - Bostich Framing Guns. One almost new. One Just Rebuilt. Manuals. Eight + boxes of misc. nails. $300.00 for all. CASH ONLY. calltext 218820ZeroSixSixSeven Phone number ✆ +1 701-205-5824 Loma, N...

• 2 Hold Fasts

  TOOLS - Carson (North Dakota) - May 12, 2024 100.00 $

  2 Hold Fasts ⭕ 2 custom hand forged hold fasts for sale. They are about 14 1/2 long and have a 8 1/2 reach. These were custom made for me and so these hold fasts with these dimensions are hard to find. If interested, email me with your number. Phone ...

• Skil 9.6-Volt Drill/Driver

  TOOLS - Mountain (North Dakota) - May 11, 2024 15.00 $

  Skil 9.6-Volt Drill/Driver ⭕ Skil 9.6-Volt Drill/Driver Call Phone number ✆ +1 701-390-7097 Mountain, North Dakota

• Craftsman Tool Set

  TOOLS - Canton City (North Dakota) - May 11, 2024 125.00 $

  Craftsman Tool Set ⭕ 260 piece 3 drawer and top tool set brand new only used a few times have 2 of these now. Phone number ✆ +1 701-127-3839 Canton City, North Dakota

• 24 8HP Ariens ST824 Tecumseh Snowblower Electric Start (Delivery)

  TOOLS - Reeder (North Dakota) - May 11, 2024 180.00 $

  24 8HP Ariens ST824 Tecumseh Snowblower Electric Start (Delivery) ⭕ 24 8HP Ariens Tecumseh snowblower. Engine runs good, carburetor has been drained and new fuel line. Good recoil rope and recent oil change. Electric start works! Body and upper body ...

• Miller Thunderbolt AC/DC Arc Welder

  TOOLS - Mantador (North Dakota) - May 11, 2024 110.00 $

  Miller Thunderbolt AC/DC Arc Welder ⭕ Its got a fair amount of rust but works just fine. -Constant current welding power source -230V, single phase -45.5 amps -60 Hz -Positive and negative leads included Phone number ✆ +1 701-413-7992 Mantador, North...

• Curtis Rotary Screw Air Compressor

  TOOLS - Dodge (North Dakota) - May 11, 2024 3375.00 $

  Curtis Rotary Screw Air Compressor ⭕ CAD Price $4500CAD USD Price~$3374USD (at time of posting) Features Brand: Curtis Model: RS50 Power: 575V, 50HP Serial: 04A97004 Weight: 2000 125PSI The RS Rotary Screw Air Compressor Series are designed and built...

• HK Porter 8690HF Bolt And Wire Cutter

  TOOLS - Ellendale (North Dakota) - May 10, 2024 189.00 $

  HK Porter 8690HF Bolt And Wire Cutter ⭕ HK Porter 8690HF bolt and rod cutter Made in USA $189.00 Call or text Santiago Phone number ✆ +1 701-614-7762 Ellendale, North Dakota

• Kobalt 1.8-HP 26-Gallon 150-PSI Vertical Portable Air Compressor

  TOOLS - Surrey (North Dakota) - May 10, 2024 150.00 $

  Kobalt 1.8-HP 26-Gallon 150-PSI Vertical Portable Air Compressor ⭕ Kobalt 1.8-HP 26-Gallon 150-PSI 120-Volt Vertical Portable Electric Air Compressor. The TOOL CONSIGNMENT® Store now has an online store for your convenience at www.toolconsignment.com...

• Craftsman C-Clamp Deep Reach Pearlitic

  TOOLS - Alsen (North Dakota) - May 10, 2024 40.00 $

  Craftsman C-Clamp Deep Reach Pearlitic ⭕ Four Craftsman C-Clamp Deep Reach Pearlitic #88882 - Made in the USA. Features Black Oxide Coating; Oscillating Head; Sliding Cross Pin Handle; and, Deep Reach Pattern. Ideal for applications requiring increas...

• Craftsman Nextec Hammerhead

  TOOLS - Grace City (North Dakota) - May 10, 2024 45.00 $

  Craftsman Nextec Hammerhead ⭕ Hammerhead Model 320-101352 New 45.00 Phone number ✆ +1 701-672-8267 Grace City, North Dakota

• 2 Oregon Saw Chains S56T 16

  TOOLS - Knox (North Dakota) - May 10, 2024 24.00 $

  2 Oregon Saw Chains S56T 16 ⭕ Brand new in original plastic package. Phone number ✆ +1 701-316-5504 Knox, North Dakota

• TOOL BOX AND TOOLS

  TOOLS - Gascoyne (North Dakota) - May 9, 2024 35.00 $

  TOOL BOX AND TOOLS ⭕ CRAFTSMAN 18 in. box with tray and tools. Off brand wrenches,screwdrivers allen wrenches. All usable tools. Phone number ✆ +1 701-296-9385 Gascoyne, North Dakota

• Air Compressor With Spray Gun

  TOOLS - Willow City (North Dakota) - May 9, 2024 100.00 $

  Air Compressor With Spray Gun ⭕ We bought this air compressor new about a year ago for a project and didnt end up using it. $100 and includes spray gun attachment. Phone number ✆ +1 701-249-3796 Willow City, North Dakota

• Ryobi Combo Set

  TOOLS - Oakes (North Dakota) - May 9, 2024 80.00 $

  Ryobi Combo Set ⭕ This set comes with a large hard case, holds a Drill, Sawsaw, Circular saw, flashlight and two battery(bad need to be replaced). You will need new batterys and a charger. 80obo or trade for a Drill Press, Horizon saw or some other s...

• Wood Working Tools/Shopsmith Mark V

  TOOLS - Wolford (North Dakota) - May 9, 2024 1200.00 $

  Wood Working Tools/Shopsmith Mark V ⭕ If you are interested in wood working heres a machine that you will enjoy. This Shopsmith Mark V is a multi-tool. Table saw, drill press, edge planer, sander, router/moulder, lathe and more. It comes with all the...

• Stihl MS270c Chainsaw

  TOOLS - New Salem (North Dakota) - May 9, 2024 175.00 $

  Stihl MS270c Chainsaw ⭕ Stihl MS270 Chainsaw in good condition. 18 in. bar. Sharp chain. Ready to cut. It is equipped with the tool less chain tensioner. Phone number ✆ +1 701-428-8060 New Salem, North Dakota

• A Bunch Of Random Tools

  TOOLS - Karlsruhe (North Dakota) - May 9, 2024 1.00 $

  A Bunch Of Random Tools ⭕ We had to move and so were getting rid of everything we had. If you have any questions please feel free to ask me. Thank you all Phone number ✆ +1 701-421-6536 Karlsruhe, North Dakota

• RedGard (just Under 2 Gallons )

  TOOLS - Haynes (North Dakota) - May 9, 2024 40.00 $

  RedGard (just Under 2 Gallons ) ⭕ Used this to create my shower pan in my remodel. Works great. 3.5 gallon bucket. At least 1/2 left. 50 per gallon at home depot Phone number ✆ +1 701-648-5010 Haynes, North Dakota

• Cut N Crown Molding Jig

  TOOLS - Mercer (North Dakota) - May 9, 2024 100.00 $

  Cut N Crown Molding Jig ⭕ Crown molding jig. Used twice Phone number ✆ +1 701-407-4070 Mercer, North Dakota

• ELECTRICAL EXTENTION CORDS

  TOOLS - Fort Yates (North Dakota) - May 8, 2024 4.00 $

  ELECTRICAL EXTENTION CORDS ⭕ FOR SALE ELECTRICAL EXTENTION CORDS 16 G TO 12 G 15 FT TO 50 FT $ 4.00 TO $20 . FOR MORE INFORMATION . CALL OR TEXT Phone number ✆ +1 701-962-5574 Fort Yates, North Dakota

• Air Tool And Sanders

  TOOLS - Pingree (North Dakota) - May 7, 2024 60.00 $

  Air Tool And Sanders ⭕ I have two air tools comes with sanders Phone number ✆ +1 701-426-1371 Pingree, North Dakota

• Scroll Saw

  TOOLS - Kindred (North Dakota) - May 7, 2024 55.00 $

  Scroll Saw ⭕ Master machanic 15 scroll saw on homemade stand & x-tra blades $55.00. Cash only please call Phone number ✆ +1 701-983-2154 Kindred, North Dakota

• Air Compressor. 3 H.P. 240 Volt

  TOOLS - Cleveland (North Dakota) - May 7, 2024 125.00 $

  Air Compressor. 3 H.P. 240 Volt ⭕ Air compressor Phone number ✆ +1 701-947-5498 Cleveland, North Dakota

• Shopsmith Mark V 510

  TOOLS - Kief (North Dakota) - May 6, 2024 1200.00 $

  Shopsmith Mark V 510 ⭕ Shopsmith Mark V 510 with Dust collector. Excellent condition. Call or text to see. Phone number ✆ +1 701-572-4059 Kief, North Dakota

• Hercules Industrial Tripod Model 5302

  TOOLS - Forman (North Dakota) - May 6, 2024 25.00 $

  Hercules Industrial Tripod Model 5302 ⭕ Hercules Industrial Tripod Model 5302, made in the US by Quick-Set Inc. Was originally used by the University of Chicagos Audio Visual Center. Phone number ✆ +1 701-594-2865 Forman, North Dakota

• Bostitch 4 Gal. Air Compressor

  TOOLS - McVille (North Dakota) - May 6, 2024 66.00 $

  Bostitch 4 Gal. Air Compressor ⭕ For Sale. Bostitch 4gal. Air Compressor. Asking $66. Open Monday thru Saturday From 9am til 6pm. We are located a block west of Rock-N-Roll Hardees. In between Starship Billiards and True Value Hardware. Phone number ...

• MAKITA 5.2GAL AIR COMPRESSOR 217591-1

  TOOLS - Lincoln (North Dakota) - May 6, 2024 220.00 $

  MAKITA 5.2GAL AIR COMPRESSOR 217591-1 ⭕ Makita 3HP 5.2gal rolling air compressor. Local pickup only. Mountain Man Trading Post 2084 Harrison Avenue Butte MT 59701 Phone number ✆ +1 701-530-4281 Lincoln, North Dakota

• Dust Collector With Seperator

  TOOLS - Columbus (North Dakota) - May 5, 2024 130.00 $

  Dust Collector With Seperator ⭕ 2 horse Harbor Freight dust collector with thein baffle separator. System works flawless for separating the dust from the collector, making it easier to empty and less wear on the dust collector. Dust collector works g...

• BATTERY TESTER 1000 AMP

  TOOLS - Spiritwood Lake (North Dakota) - May 5, 2024 99.00 $

  BATTERY TESTER 1000 AMP ⭕ WHAT A MACHINE!! BIG TIME PRO.BATTERY TESTER Phone number ✆ +1 701-829-1996 Spiritwood Lake, North Dakota

• Edger

  TOOLS - Des Lacs (North Dakota) - May 5, 2024 10.00 $

  Edger ⭕ Barely used. Phone number ✆ +1 701-987-5690 Des Lacs, North Dakota

• Bissell Steamshot-New

  TOOLS - McHenry (North Dakota) - May 5, 2024 15.00 $

  Bissell Steamshot-New ⭕ Bissell Steamshot...New, Never used. Phone number ✆ +1 701-806-5720 McHenry, North Dakota

• Lincoln Sa250 Welder

  TOOLS - Zeeland (North Dakota) - May 4, 2024 4000.00 $

  Lincoln Sa250 Welder ⭕ Runs and welds excellent 1285 hours asking 4000 obo will deliver with in reason for asking price call Phone number ✆ +1 701-422-6816 Zeeland, North Dakota

• Flatbed Equipment

  TOOLS - Lawton (North Dakota) - May 4, 2024 350.00 $

  Flatbed Equipment ⭕ Edge protectors for flatbed loads..used...small ..medium ..large ..34small 40medium 22large ...the large red protectors are 36inch long ..all for $350.00.. Phone number ✆ +1 701-898-6531 Lawton, North Dakota

• 77 BRAND NEW UNIBITS

  TOOLS - Park River (North Dakota) - May 4, 2024 600.00 $

  77 BRAND NEW UNIBITS ⭕ I have 77 Brand new Unibits valued over 2500.00 will sell for 600.00 Firm Serious calls only I will not split up sell 77 all together hole sizes 3/16 to 1/3/8 also 3/16 to 7/8 there is no games here .Dad passed away do not need...

• Makita Drywall Gun

  TOOLS - Carrington (North Dakota) - May 3, 2024 40.00 $

  Makita Drywall Gun ⭕ Makita drywall screw gun works great just missing attachment Phone number ✆ +1 701-226-2039 Carrington, North Dakota

• 4x6 Foot Generator Molds For Concrete

  TOOLS - Gardner (North Dakota) - May 3, 2024 50.00 $

  4x6 Foot Generator Molds For Concrete ⭕ I have 2 wood molds made to pour a 4x6 concrete pad 2 inches thick for mounting generators. $50 each Phone number ✆ +1 701-891-8266 Gardner, North Dakota

• Southbend Lathe, 10 Precision Tool Room Lathe

  TOOLS - Alsen (North Dakota) - May 3, 2024 1.00 $

  Southbend Lathe, 10 Precision Tool Room Lathe ⭕ SOUTHBEND 10 Precision LATHE with TAPER Attachment for Tool an Die Shop. Selling it for 2,500.00 cash, not open to offers or in a hurry to sell. This is 120 volt 3 phase. This Lathe cost over 7,000.00 a...

• Stihl Ts420 Concrete Saw

  TOOLS - Hazelton (North Dakota) - May 2, 2024 545.00 $

  Stihl Ts420 Concrete Saw ⭕ Hello, im selling my stihl ts420. Saw runs as it should just been services all stihl parts, filters, stihl ultra oil and nothing but non ethanol fuel. Any questions please call or text and leave a message Ill get back to yo...

• TROY-BILT GENERATOR 5,250 Watt

  TOOLS - Tappen (North Dakota) - May 2, 2024 265.00 $

  TROY-BILT GENERATOR 5,250 Watt ⭕ Troy-Bilt Generator 5,250 Starting Watt - 3,550 Constant 7 H.P. Briggs ohv Runs Great Serviced & Ready To Go $265.00 - Firm Phone number ✆ +1 701-854-5938 Tappen, North Dakota

• Beehive Box Joint Cutter

  TOOLS - Hunter (North Dakota) - May 2, 2024 3800.00 $

  Beehive Box Joint Cutter ⭕ We make a custom beehive box joint cutter that will make all of your hive bodies with ease. This machine cuts all the different sizes of boxes without having to adjust a fence. The cutters have indexable carbide tips so no ...

• MAC TOOLS TECH 1000 11 Drawer Tool Box Work Station

  TOOLS - Mayville (North Dakota) - May 1, 2024 1850.00 $

  MAC TOOLS TECH 1000 11 Drawer Tool Box Work Station ⭕ MAC TOOLS TECH 1000 11 Drawer Tool Box Work Station The TOOL CONSIGNMENT® Store now has an online store for your convenience at www.toolconsignment.com. In the online store you will find a varied ...

• Dolly

  TOOLS - Great Bend (North Dakota) - May 1, 2024 35.00 $

  Dolly ⭕ A metallic dolly in a perfect condition. Phone number ✆ +1 701-984-9566 Great Bend, North Dakota

• RIDGID CANVAS TOOL BAG

  TOOLS - Knox (North Dakota) - April 30, 2024 20.00 $

  RIDGID CANVAS TOOL BAG ⭕ RIDGID CANVAS TOOL BAG. ZIPPER WORKS FINE. VERY GOOD CONDITION. $20.00 CALLS ONLY. NO TEXTS. Phone number ✆ +1 701-585-9131 Knox, North Dakota

• Wanted Craftsman Workbench

  TOOLS - New England (North Dakota) - April 30, 2024 1.00 $

  Wanted Craftsman Workbench ⭕ Looking for a Craftsman Workbench in good condition. Have cash waiting for a deal! Phone number ✆ +1 701-836-2114 New England, North Dakota

• ---VINYL PLANK $1.29 SF---

  TOOLS - Maddock (North Dakota) - April 30, 2024 1.00 $

  ---VINYL PLANK $1.29 SF--- ⭕ VINYL PLANK starting @ $1.29 a square foot. Several styles and brands to choose from. Shop local and SAVE! Phone number ✆ +1 701-256-9691 Maddock, North Dakota

• Dewalt Drills

  TOOLS - Bowman (North Dakota) - April 29, 2024 50.00 $

  Dewalt Drills ⭕ 3 3/8 drive drills 50 dollars each all work great come with case charger and battery sell them all for a 120. Phone number ✆ +1 701-182-5391 Bowman, North Dakota

• Concrete Drill Bits SDS

  TOOLS - Wishek (North Dakota) - April 28, 2024 1.00 $

  Concrete Drill Bits SDS ⭕ HILTI (3) model #293472 brand new $90 each BOSCH (1) Model # HC2087 $20 Triumph Twist Drill Co. Size 5/8 model # 92840 $15 each Size 1/2 model # 91932 $10 each Size 7/16 model # 91928 $10 each HILTI model # TE-C 3/8-12 $15. ...

• ONSITE ESTATE ONLINE AUCTION IN BELGRADE,MT

  TOOLS - Warwick (North Dakota) - April 28, 2024 1.00 $

  ONSITE ESTATE ONLINE AUCTION IN BELGRADE,MT ⭕ Go to Belgrade Online Auctions.com 2/16 - 2/22 ENDS 7PM! 5 Cars & trucks from local Estate selling no reserve !! Also tools, Antiques, Collectibles, Furniture ,Freezers, Knifes,Comic books,Baseball cards ...

• Miller Bobcat, Garage Kept, Low Hours

  TOOLS - Sharon (North Dakota) - April 28, 2024 2600.00 $

  Miller Bobcat, Garage Kept, Low Hours ⭕ miller bobcat 225g, this is an ac/dc welding machine, it has a 30 ft ground wire, and a 60 lead wire, unit starts every time and welds like a dream. its got 278 hours on the machine, have never had a problem wi...